[450] Link loops progress

[David McKenzie]

I also have another USB sound card on the way, hopefully this one will work
better. If not it's on to the $30 soundblaster usb which also may or may
not work.


On Mon, Jun 3, 2013 at 10:06 PM, David McKenzie <k1fsy at vhfwiki.com> wrote:

> I havent found any but if you order some crimp ones i will gladly crimp
> them. Davis RF has the full line and they are also available on ebay and
> elsewhere.
>
> I'm going to check amazon too just to see.
>
>
> On Mon, Jun 3, 2013 at 9:47 PM, Bob <n1ujs at toast.net> wrote:
>
>> I got the frozen set screws out.
>> Made new ones out of cheap rotor mounting studs....cut off a 1/2" times
>> two and 3/4" times two off the studs at the screw driver slotted ends and
>> beveled the other ends with the grinder.
>> Bent both mangled loops back to a nice level square.
>>
>> I will polish up the connections, make a harness and mount assembly, and
>> tune them flat for 450 shortly.
>>
>> If no one pops up with connectors and reducers, I will order some.
>>
>> [image: Inline image 1]
>>
>> _______________________________________________
>> 450 mailing list
>> 450 at lists.vhfwiki.com
>> http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130603/a8f493da/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: loopssmall.jpg
Type: image/jpeg
Size: 480927 bytes
Desc: not available
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130603/a8f493da/attachment-0001.jpg>