[450] Link loops progress

David McKenzie k1fsy at vhfwiki.com
Mon Jun 3 22:06:45 EDT 2013

I havent found any but if you order some crimp ones i will gladly crimp
them. Davis RF has the full line and they are also available on ebay and

I'm going to check amazon too just to see.

On Mon, Jun 3, 2013 at 9:47 PM, Bob <n1ujs at toast.net> wrote:

> I got the frozen set screws out.
> Made new ones out of cheap rotor mounting studs....cut off a 1/2" times
> two and 3/4" times two off the studs at the screw driver slotted ends and
> beveled the other ends with the grinder.
> Bent both mangled loops back to a nice level square.
> I will polish up the connections, make a harness and mount assembly, and
> tune them flat for 450 shortly.
> If no one pops up with connectors and reducers, I will order some.
> [image: Inline image 1]
> _______________________________________________
> 450 mailing list
> 450 at lists.vhfwiki.com
> http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130603/5e3407f4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: loopssmall.jpg
Type: image/jpeg
Size: 480927 bytes
Desc: not available
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130603/5e3407f4/attachment-0001.jpg>

More information about the 450 mailing list