[450] Link loops progress

[John Foege]

Looks like everything is starting to take shape....I will get clearance
from parents to use East Mountain QTH.
On Jun 4, 2013 3:48 AM, "Bob" <n1ujs at toast.net> wrote:

> I got the frozen set screws out.
> Made new ones out of cheap rotor mounting studs....cut off a 1/2" times
> two and 3/4" times two off the studs at the screw driver slotted ends and
> beveled the other ends with the grinder.
> Bent both mangled loops back to a nice level square.
>
> I will polish up the connections, make a harness and mount assembly, and
> tune them flat for 450 shortly.
>
> If no one pops up with connectors and reducers, I will order some.
>
> [image: Inline image 1]
>
> _______________________________________________
> 450 mailing list
> 450 at lists.vhfwiki.com
> http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130604/ba65ff79/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: loopssmall.jpg
Type: image/jpeg
Size: 480927 bytes
Desc: not available
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20130604/ba65ff79/attachment-0001.jpg>
-------------- next part --------------
_______________________________________________
450 mailing list
450 at lists.vhfwiki.com
http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450