[450] Ice dam busters

K1FSY k1fsy at vhfwiki.com
Thu Mar 5 22:53:19 UTC 2015


propane flame thrower

On 3/5/2015 5:02 PM, Chris wrote:
> I just use a hammer...
>
>
>
> On Mar 2, 2015, at 09:09, John Foege <john.foege at gmail.com
> <mailto:john.foege at gmail.com>> wrote:
>
>> Going to look something like this once I'm finished. You fill panty
>> hoe legs with calcium chloride flakes, tie off the ends, and place
>> them perpendicular to the ice dam with the ends hanging over the
>> eave. They melt troughs through the dam and allow the pooled water
>> behind it to drain.
>>
>> This is the quick fix. The long term fix is to ensure you have a
>> ridge vent, soffet vents, good insulation of the attic floors (dual
>> layers in the NE even), and that you find and squash any sources of
>> heat leakage into the attic.
>>
>> Essentially if you can assure the temperature of the air in attic is
>> the same as the outside ambient air temperature, you will never have
>> ice damming and the costly repairs of the subsequent water damage
>> they bring!
>>
>> _______________________________________________
>> 450 mailing list
>> 450 at lists.vhfwiki.com <mailto:450 at lists.vhfwiki.com>
>> http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450
>
>
> _______________________________________________
> 450 mailing list
> 450 at lists.vhfwiki.com
> http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20150305/ee26bc16/attachment.html>


More information about the 450 mailing list