[450] Slack Loop Addendun

Bob N1UJS at toast.net
Mon Mar 23 21:37:54 EDT 2009


Ugh....I need a new keyboard....excuse all the typos....
  ----- Original Message ----- 
  From: Bob 
  To: 144.450 Mailing List 
  Sent: Monday, March 23, 2009 8:30 PM
  Subject: Re: [450] Slack Loop Addendun


  I don't have any close up pictures, so I'll try to explain....
  dress the cable from the beam in a straight line domn the mast with wire ties ont he OPPOSING side of the mast from the "rotor stop"......put the LAST wire tie (idealy MORE than one at this point) a foot or two above the rotor.   With the antenna turned halfway through rotation (if your "stop is NORTH, then point it SOUTH) bulge the cable out a foot or more so it makes a hump in the same direction the antenna is pointed, then start strpping it to the mast BELOW the rotor at about a foot or two down the mast and continue down with your ties.
  This should allow you enough slack in either direction of rotation.
  Get it?

    ----- Original Message ----- 
    From: djmay at comcast.net 
    To: 450 at lists.vhfwiki.com 
    Sent: Monday, March 23, 2009 7:07 PM
    Subject: [450] Slack Loop Addendun


    Pictures OR diagrams would be greatly apprecited.  No rush, the beam is coming from M2 in California, and I was told it might be about a week.



----------------------------------------------------------------------------


    _______________________________________________
    450 mailing list
    450 at lists.vhfwiki.com
    http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450



------------------------------------------------------------------------------


  _______________________________________________
  450 mailing list
  450 at lists.vhfwiki.com
  http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vhfwiki.com/pipermail/450/attachments/20090323/f091b4e0/attachment.html>
-------------- next part --------------
_______________________________________________
450 mailing list
450 at lists.vhfwiki.com
http://lists.vhfwiki.com/cgi-bin/mailman/listinfo/450


More information about the 450 mailing list